Search
Link Search Menu Expand Document
Kony Quantum is now HCL Volt MX. See Revised Terminology. Current Quantum users, see the important note about API naming.
Release:

Functions

The Gesture API contains the following functions, which are part of the voltmx.application Namespace.

voltmx.application.addGestureRecognizerForAllForms

Using the addGestureRecognizerForAllForms function, you can set a gesture recognizer for all the forms.

Syntax 

voltmx.application.addGestureRecognizerForAllForms ([gestureType](#gestureType1), [gestureConfigParams](#gestureConfigParams1),[onGestureClosure](#onGestureClosure1))

Input Parameters

gestureType [Number] - Mandatory

Indicates the type of gesture that must be detected on the widget. Following are the possible gestureType values:

  • 1 – constants.GESTURE_TYPE_TAP
  • 2 - constants.GESTURE_TYPE_SWIPE
  • 3 – constants.GESTURE_TYPE_LONGPRESS
  • 4 – constants.GESTURE_TYPE_PAN
  • 5 – constants.GESTURE_TYPE_ROTATION
  • 6 - constants.GESTURE_TYPE_PINCH
  • 7 - constants.GESTURE_TYPE_RIGHTTAP

Note:  

  • RIGHTTAP is applicable only to Windows 10 platform.
  • ROTATION is not supported on Android.

gestureConfigParams [object] - Mandatory

Specifies a table that has the configuration parameters that are required to setup a gesture recognizer. The configuration parameters vary based on the type of the gesture.

Gesture Type Configuration Parameter
TAP fingers [Number] - specifies the maximum number of fingers that are allowed for a gesture. The possible values are 1, 2. Default value is 1.taps [Number] - specifies the maximum number of taps that are allowed for a gesture. The possible values are 1, 2. Default value is 1.
SWIPE fingers [ Number] - specifies the maximum number of fingers that are allowed for a gesture. The possible values are 1, 2. Default value is 1.
LONGPRESS pressDuration [Number] - specifies the minimum time interval (in seconds) after which the gesture is recognized. The default value is 1. This is not applicable to Windows. For example, {pressDuration:1}
PAN fingers [number] - specifies the minimum number of fingers that are required to recognize this gesture. Default value is 1. continuousEvents [Boolean] - indicates if callback should be called continuously for every change beginning from the time the gesture is recognized to the time it ends.
ROTATION fingers [Number] - The number of fingers that are required to recognize the gesture. The Default value is 2. continuousEvents [Boolean] - indicates if callback must be called continuously for every change beginning from the time the gesture is recognized to the time it ends.
PINCH fingers [Number] - The number of fingers that are required to recognize the gesture. The Default value is 2. continuousEvents [Boolean] indicates if callback should be called continuously every change beginning from the time the gesture is recognized to the time it ends.

onGestureClosure [function] - Mandatory

Specifies the function that needs to be executed when a gesture is recognized. This function will be raised asynchronously and has the following signature:

onGestureClosure(widgetRef, gestureInfo, context)
Parameter Description
widgetRef specifies the handle to the widget on which the gesture was recognized.
gestureInfo Table with information about the gesture. The contents of this table vary based on the gesture type.
context Table with SegmentedUI row details.

 

gestureInfo table has the following key-value pairs:

Key Description
gestureType [number] Indicates the gesture type
gesturesetUpParams [object] Specifies the set up parameters passed while adding the gesture recognizer
gesturePosition [number] Indicates the position where the gesture is recognized. Possible values are: 1 for TOPLEFT2 for TOPCENTER3 for TOPRIGHT4 for MIDDLELEFT5 for MIDDLECENTER6 for MIDDLERIGHT7 for BOTTOMLEFT8 for BOTTOMCENTER9 for BOTTOMRIGHT10 for CENTER
swipeDirection [number] Indicates the direction of swipe. Direction is w.r.t the view and not device orientation. This parameter is applicable only if the gesture type is SWIPE. Possible values are: 1 for LEFT 2 for RIGHT 3 for TOP4 for BOTTOM
gestureX [number] specifies the X coordinate of the point (in pixels) where the gesture has occurred. The coordinate is relative to the widget coordinate system.
gestureY [number] specifies the Y coordinate of the point (in pixels) where the gesture has occurred. The coordinate is relative to the widget coordinate system.
widgetWidth [number] specifies the width of the widget (in pixels).
widgetHeight [number] specifies the height of the widget (in pixels).
gestureState[number] Indicates the gesture state. The gestureState is applicable only for continuous gestures like PAN, ROTATION, and PINCH.1 – gesture state begin2 - gesture state changed3 – gesture state ended
rotation [number] Rotation of the gesture in degrees since its last change.( Applicable only when gesture type is ROTATION)
velocityX and velocityY horizontal and vertical component of velocity expressed in points per second. (Applicable only for PAN gesture type)
velocity [number] velocity of pinch in scale per second. (Applicable only for Pinch gesture)
scale [number] scale factor relative to the points of the two touches in screen coordinates.
touchType[number] (Applicable to windows platform only)0 - constants.TOUCHTYPE_FINGER1 - constants.TOUCHTYPE_PEN2 - constants.TOUCHTYPE_MOUSE
translationX and translationY [number] Cumulative distance as number. (Applicable only for PAN gesture type)

 

context table has the following key-value pairs:

Key Description
rowIndex [number] Row index of the segment UI where gesture is recognized. (Applicable to gestures added to segUI rows)
sectionIndex [number] Section index of the segment UI where gesture is recognized. (Applicable to gestures added to segUI rows)

 

Example 

//Defining a function
function formGesture(widgetID, gestureInfo) {
    var y = voltmx.type(gestureInfo); //expected value of y = table
    var z = voltmx.type(gestureInfo.gesturesetUpParams); //expected values of z = table
    var a = gestureInfo.gestureType;
    var b = gestureInfo.gesturesetUpParams;
    var c = gestureInfo.gesturePosition;
    var d = gestureInfo.gestureX;
    var e = gestureInfo.gestureY;
    var f = gestureInfo.widgetWidth;
    var g = gestureInfo.widgetHeight;
    voltmx.print("*******************************************");
    if (voltmx.os.toNumber(gestureInfo.gestureType) == 2) {
        h = gestureInfo.swipeDirection;
        voltmx.print("swipe direction is: " + h);
    } else {
        h = "";
    }
    if (voltmx.os.toNumber(a) == 1) {
        b1 = "fingers: " + gestureInfo.gesturesetUpParams.fingers;
        b2 = "taps: " + gestureInfo.gesturesetUpParams.taps;
        voltmx.print("" + b1 + "" + b2);
    } else if (voltmx.os.toNumber(a) == 2) {
        b1 = "fingers :" + gestureInfo.gesturesetUpParams.fingers;
        b2 = "";
        voltmx.print("" + b1 + "" + b2);
    } else if (voltmx.os.toNumber(a) == 3) {
        b1 = "pressduration:" + gestureInfo.gesturesetUpParams pressDuration;
        b2 = "";
        voltmx.print("" + b1 + "" + b2);
    }

    voltmx.print("widget id is: " + widgetID[id]); //will print the widgetID. 
    //To print widgetID use widgetID.id
    voltmx.print("type of gestureInfo is: " + y);
    voltmx.print("type of gesturesetUpParams is: " + z);
    voltmx.print("gestureType is: " + a); //gestureType=1 or 2 or 3
    voltmx.print("gesturesetUpParams is: " + b.fingers); 
  /*gesturesetUpParams 
    = {
        fingers = 1, taps = 1
    }
    or {
        fingers = 1, taps = 2
    }
    or {
        fingers = 1
    }
    or {
        pressDuration = 1
    }*/
    voltmx.print("gesturePosition is: " + c); //gesturePosition=1 or 2 or 3 or .....9
    voltmx.print("gestureX is: " + d); //ex: gestureX=30
    voltmx.print("gestureY is: " + e); //ex: gestureY=100
    voltmx.print("widgetWidth is: " + f); //ex: widgetWidth=320
    voltmx.print("widgetHeight is: " + g); //ex: widgetHeight=28
    //gesturePosition, gestureX, gestureY, widgetWidth, widgetHeight params are not applicable in android
    voltmx.print("*******************************************");
}

function callbackSingleTapGesture() {
    var x = {
        fingers: 1,
        taps: 1
    };
    try {
        voltmx.application.addGestureRecognizerForAllForms(1, x,
            formGesture);
    } catch (err) {
        alert(typeof err);
        alert("error in function callbackSingleTapGesture: " + err.message);
    }
}

Return Values

String - Reference to the gesture is returned.

Platform Availability

Available on all platforms except Server Side Mobile Web and Desktop Web.

voltmx.application.removeGestureRecognizerForAllForms

This method allows you to remove a specified gesture recognizer for all Forms.

Syntax 

voltmx.application.removeGestureRecognizerForAllForms(uniqueIdentifier)

Input Parameters

Parameter Description
uniqueIdentifier - Mandatory Reference to the gesture. The reference to the gesture is returned by the setGestureRecognizerForAllForms.

 

Example 

function callbackClearLongPressGesture() {
    try {
        voltmx.application.removeGestureRecognizerForAllForms(uniqueidentifier);
    } catch (err) {
        alert(typeof err);
        alert("error in function callbackClearLongPressGesture: " + err.message);
    }
}

Platform Availability

Available on all platforms except Server Side Mobile Web and Desktop Web.