FlexContainer Properties

Enables you to control accessibility behavior and alternative text for the widget.

For more information on using accessibility features in your app, see the Accessibility appendix in the Volt MX IrisUser Guide.

Syntax

accessibilityConfig

Type

Object

Read/Write

Read + Write

Remarks

• The accessibilityConfig property is enabled for all the widgets which are supported under the Flex Layout.

Note: From Volt MX Iris V9 SP2 GA version, you can provide i18n keys as values to all the attributes used inside the accessibilityConfig property. Values provided in the i18n keys take precedence over values provided in a11yLabel, a11yValue, and a11yHint fields.

The accessibilityConfig property is a JavaScript object which can contain the following key-value pairs.

Android limitations

• If the results of the concatenation of a11y fields result in an empty string, then accessibilityConfig is ignored and the text that is on widget is read out.
• The soft keypad does not gain accessibility focus during the right/left swipe gesture when the keypad appears.

SPA/Desktop Web limitations

• When accessibilityConfig property is configured for any widget, the tabIndex attribute is added automatically to the accessibilityConfig property.
• The behavior of accessibility depends on the Web browser, Web browser version, Voice Over Assistant, and Voice Over Assistant version.
• Currently SPA/Desktop web applications support only a few ARIA tags. To achieve more accessibility features, use the attribute a11yARIA. The corresponding tags will be added to the DOM as per these configurations.

Example 1

This example uses the button widget, but the principle remains the same for all widgets that have an accessibilityConfig property.

//This is a generic property that is applicable for various widgets.
//Here, we have shown how to use the accessibilityConfig Property for button widget.
/*You need to make a corresponding use of the accessibilityConfig property for other applicable widgets.*/

Form1.myButton.accessibilityConfig = {
    "a11yLabel": "Label",
    "a11yValue": "Value",
    "a11yHint": "Hint"    
};

Example 2

This example uses the button widget to implement internationalization in accessibilityConfig property, but the principle remains the same for all widgets.

/*Sample code to implement internationalization in accessibilityConfig property in Native platform.*/

Form1.myButton.accessibilityConfig = {
    "a11yLabel": voltmx.i18n.getLocalizedString("key1")     
};  
/*Sample code to implement internationalization in accessibilityConfig property in Desktop Web platform.*/

Form1.myButton.accessibilityConfig = {
    "a11yLabel": "voltmx.i18n.getLocalizedString(\"key3\")"
};

Platform Availability

• Available in the IDE
• iOS, Android, SPA, and Desktop Web

The property helps to specify the type of navigation order that should be used in the FlexContainer.

Syntax

a11yNavigationMode

Type

Number

Read/Write

Read + Write

Remarks

You can define any one of the following values to the property:

• constants.ACCESSIBILITY_NAVIGATION_MODE_NATIVE: Native accessibility navigation. Applies the platform’s default accessibility navigation order. This is the default value for the property.
• constants.ACCESSIBILITY_NAVIGATION_MODE_PARENT: Applies a custom navigation for widgets based on the a11yIndices set to the child widgets.
• constants.ACCESSIBILITY_NAVIGATION_MODE_DEFAULT: Derives the property value from its immediate parent going all the way to form level.

Example

//Sample code to set the a11yNavigationMode property to a FlexContainer widget.

myForm.myFlexContainer.accessibilityConfig = {
    "a11yNavigationMode": constants.ACCESSIBILITY_NAVIGATION_PARENT   
};

Availability

iOS

Specifies the anchor point of the widget bounds rectangle using the widget’s coordinate space.

Syntax

anchorPoint

Type

JSObject

Read/Write

Read + Write

Remarks

The value for this property is a JavaScript dictionary object with the keys “x” and “y”. The values for the “x” and “y” keys are floating-point numbers ranging from 0 to 1. All geometric manipulations to the widget occur about the specified point. For example, applying a rotation transform to a widget with the default anchor point causes the widget to rotate around its center.

The default value for this property is center ( {“x”:0.5, “y”:0.5} ), that represents the center of the widgets bounds rectangle. The behavior is undefined if the values are outside the range zero (0) to one (1).

Example

Form1.widget1.anchorPoint = {
    "x": 0.5,
    "y": 0.5
};

Platform Availability

• iOS, Android, Windows, and SPA

This property is enables you to grow the height of the FlexContainer when child widgets or content is added on the FlexContainer. The options are:

The autogrowMode property is used to set the height of a widget dynamically based on the derived height of the widget’s content, or from the child widget’s contents. The options are:

• voltmx.flex.AUTOGROW_NONE (value is 0)
• voltmx.flex.AUTOGROW_HEIGHT (value is 1)

Syntax

autogrowMode

Type

Number

Read/Write

Read only

Remarks

Note: If you want to configure this property in Volt MX Iris, configure the height property of FlexContainer as preferred, then Volt MX Iris generates the autogrowMode property as voltmx.flex.AUTOGROW_HEIGHT.

The default value for this property is voltmx.flex.AUTOGROW_NONE.

Note: If one or all the child widgets height or other properties such as centerY, top, bottom, minHeight or maxHeight are used in determining the height given in percentage (%), then the autogrowMode property will not work for the FlexContainer and its height fallback to default configuration value.

Rules and priorities of autogrowMode property

• The autogrowMode property is ignored if the height of the widget is computable either through explicit value or implicit calculation.

• If the autogrowMode property is configured as voltmx.flex.AUTOGROW_HEIGHT, then preferredSize (based on content or child widgets ) is computed, and min/max constraints are applied.
• If the autogrowMode property is configured as voltmx.flex.AUTOGROW_NONE, the default value is applied with min/max constraints.
• The height of a FlexContainer widget will not grow dynamically if the height of any widget changes because of the change in widget’s skin state (such as from normal to focus).
• If a widgets top value is given in negative values, then the widget is clipped in case of Free Form and overlapped on the previous widget in case of Flow Vertical.
• The autogrowMode property is not supported for a FlexContainer widget that is placed inside an HBox or a VBox.
• For example, a FlexContainer (flexA) has a FlexContainer (flexB), which is not set to grow dynamically, whose clipBounds is set to false. The children of flexB that are out of the bounds of flexB do not have any effect on the height of flexA. Only the heights of direct children of flexA will decide the height of flexA.
• In templates, FlexContainer will grow only in SegmentedUI Table View only. In all other views, autogrowMode property is not supported.
• The autogrowMode property for a FlexContainer is not supported in the Tab Widget.
• In the Windows platform, the autogrowMode property of a SegmentedUI is not supported inside a FlexContainer.
• The autogrowMode property of a SegmentedUI with a large number of rows leads to performance and memory issues.
• Excessive usage of auto grow flex containers inside a form will impact the performance of the application.
• Rendering of widgets with preferred height or preferred width will take more time in mobile and tablet browsers compared to desktop browsers.
• When animating the height property of the child widget of a FlexContainer in iOS, Windows, and SPA platforms, after the animation is complete, then parent containers height increases based on the value provided in 100th step when fillMode is configured as voltmx.anim.FILL_MODE_FORWARDS.
• When animating the height property of the child widget of a FlexContainer in the Android platform, the parent container’s height grows along with the child widget’s height.

When to Use

Case1: If the height of the FlexContainer is dependent on the heights of the child widgets that are added.

Case2: If you are using the FlexContainer in a SegmentedUI template, where each row of the SegmentedUI row height is dependent on the child widgets content. Configure the height property of the FlexContainer as preferred, then Volt MX Iris generates the autogrowMode property as voltmx.flex.AUTOGROW_HEIGHT.

Example

//Sample code to set the autogrowMode property of a FlexContainer widget.
//Here, flexcontainer1 FlexContainer retains the height given in the height Property.
frmHome.flexcontainer1.autogrowMode=voltmx.flex.AUTOGROW_NONE;

//Here, flexcontainer1 FlexContainer uses the child widget content to determine its height.
frmHome.flexcontainer1.autogrowMode=voltmx.flex.AUTOGROW_HEIGHT;

Platform Availability

Not available in the IDE.

• iOS
• Android / Android Tablet
• Windows
• SPA

Specifies the background color of the widget.

Syntax

backgroundColor

Type

Color constant or Hexadecimal number

Read/Write

Read + Write

Remarks

• The initial value of backgroundColor has to be specified explicitly. If not, Iris will not deduce the values from the existing skin and this will lead to undefined behavior.
• Colors can be specified using a 6 digit or an 8-digit hex value with alpha position. For example, ffff65 or ffffff00.
• When the 4-byte color format (RGBA) string is used, an alpha (A) value of 65 specifies that the color is transparent. If the value is 00, the color is opaque. The Alpha value is in percentage and must be given in the hexadecimal value for the color (100% in hexadecimal value is 65).
  For example, red complete opaque is FF000000. Red complete transparent is FF000065. The values 0x and # are not allowed in the string.
• A color constant is a String that is defined at the theme level. Ensure that you append the $ symbol at the beginning of the color constant.
• This property does not have a default value.
• This property has more priority than (and overrides) the background property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.
• The backgroundColor, backgroundColorTwoStepGradient, backgroundColoMultiStepGradient, and backgroundImage properties are mutually exclusive. The property that was set most recently is given higher priority over other properties.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the backgroundColor property.

Form1.btn1.backgroundColor = "ea5075";

Platform Availability

• Android
• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

Specifies the multi-step gradient color for the background of the widget.

Syntax

backgroundColorMultiStepGradient

Type

JSON Object

Read/Write

Read + Write

Input Parameters

• gradientType [Constant]: Specifies the configuration type of the gradient. This parameter can have the following constant values:

  • voltmx.skin.MULTI_STEP_GRADIENT_TYPE_TO_TOP: Constant for the gradient type toTop.
  • voltmx.skin.MULTI_STEP_GRADIENT_TYPE_TO_RIGHT: Constant for the gradient type toRight.
  • voltmx.skin.MULTI_STEP_GRADIENT_TYPE_TO_BOTTOM: Constant for the gradient type toBottom.
  • voltmx.skin.MULTI_STEP_GRADIENT_TYPE_TO_LEFT: Constant for the gradient type toLeft.
  • voltmx.skin.MULTI_STEP_GRADIENT_TYPE_CUSTOM: Constant for the gradient type custom.
    For the custom gradient type, you must specify the angle by using the angle property.
• angle [Number]: Specifies the angle for the gradient in degrees, counted counter-clockwise. This property is only applicable for the custom gradient type.
• colors [Array]: Specifies the colors for the multi-step gradient. Colors is an array of color hex values that indicate the reference color values of the gradient. This parameter contains an array of hexadecimal numbers that represent the colors or constants defined at the theme level.
• colorStops [Array]: Specifies the color stops for the multi-step gradient. Color Stops are the locations of the reference colors on the gradient, from 0 (the start of the gradient) to 100 (the final value of the gradient). This parameter contains an array of numbers that represent the color stops.

Remarks

• The default value of the gradientType key is voltmx.skin.MULTI_STEP_GRADIENT_TYPE_TO_TOP.
• Colors can be specified using a 6 digit or an 8-digit hex value with alpha position. For example, ffff65 or ffffff00.
• When the 4-byte color format (RGBA) string is used, an alpha (A) value of 65 specifies that the color is transparent. If the value is 00, the color is opaque. The Alpha value is in percentage and must be given in the hexadecimal value for the color (100% in hexadecimal value is 65).
  For example, red complete opaque is FF000000. Red complete transparent is FF000065. The values 0x and # are not allowed in the string.
• A color constant is a String that is defined at the theme level. Ensure that you append the $ symbol at the beginning of the color constant.
• This property does not have a default value.
• This property has more priority than (and overrides) the background property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.
• The backgroundColor, backgroundColorTwoStepGradient, backgroundColoMultiStepGradient, and backgroundImage properties are mutually exclusive. The property that was set most recently is given higher priority over other properties.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the backgroundColorMultiStepGradient property.

Form1.btn1.backgroundColorMultiStepGradient = {
    "gradientType": voltmx.skin.MULTI_STEP_GRADIENT_TYPE_CUSTOM  
    "angle": 45,
    "colors": ["ea5075", "f1fa70", "eefd04"],
    "colorStops": [0, 90, 100]
};

Platform Availability

• Android
• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

Specifies the two-step gradient color for the background of the widget.

Syntax

backgroundColorTwoStepGradient

Type

JSON Object

Read/Write

Read + Write

Input Parameters

• topColor [Constant or Hex]: Specifies the top color of the two-step gradient. The value of this parameter can be a hexadecimal number that represents a color or a constant that is defined at the theme level.

• bottomColor [Constant or Hex]:Specifies the bottom color of the two-step gradient. The value of this parameter can be a hexadecimal number that represents a color or a constant that is defined at the theme level.

• style [Constant]: Specifies the configuration style of the two-step gradient. This parameter can have the following constant values:

  • voltmx.skin.TWO_STEP_GRADIENT_STYLE_VERTICAL_GRADIENT: Constant for the vertical gradient style.
  • voltmx.skin.TWO_STEP_GRADIENT_STYLE_VERTICAL_SPLIT: Constant for the vertical split style.
  • voltmx.skin.TWO_STEP_GRADIENT_STYLE_HORIZONTAL_GRADIENT: Constant for the horizontal gradient style.
  • voltmx.skin.TWO_STEP_GRADIENT_STYLE_HORIZONTAL_SPLIT: Constant for the horizontal split style.

Remarks

• The default value of the style key is voltmx.skin.TWO_STEP_GRADIENT_STYLE_VERTICAL_GRADIENT.
• Colors can be specified using a 6 digit or an 8-digit hex value with alpha position. For example, ffff65 or ffffff00.
• When the 4-byte color format (RGBA) string is used, an alpha (A) value of 65 specifies that the color is transparent. If the value is 00, the color is opaque. The Alpha value is in percentage and must be given in the hexadecimal value for the color (100% in hexadecimal value is 65).
  For example, red complete opaque is FF000000. Red complete transparent is FF000065. The values 0x and # are not allowed in the string.
• A color constant is a String that is defined at the theme level. Ensure that you append the $ symbol at the beginning of the color constant.
• This property does not have a default value.
• This property has more priority than (and overrides) the background property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.
• The backgroundColor, backgroundColorTwoStepGradient, backgroundColoMultiStepGradient, and backgroundImage properties are mutually exclusive. The property that was set most recently is given higher priority over other properties.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the backgroundColorTwoStepGradient property.

Form1.btn1.backgroundColorTwoStepGradient = {  
     "topColor": "ea5075",  
    "bottomColor": "eefd04",  
    "style": voltmx.skin.TWO_STEP_GRADIENT_STYLE_VERTICAL_GRADIENT  
};

Platform Availability

• Android
• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

Sets the image for the background of the widget.

Syntax

backgroundImage

Type

String

Read/Write

Read + Write

Remarks

• This property does not have a default value.
• This property has more priority than (and overrides) the background property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.
• The backgroundColor, backgroundColorTwoStepGradient, backgroundColoMultiStepGradient, and backgroundImage properties are mutually exclusive. The property that was set most recently is given higher priority over other properties.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the backgroundImage property.

Form1.btn1.backgroundImage = "bgImg.png";

Platform Availability

• Android
• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

You can enable or disable a blur-effect for a widget(for example, a FlexContainer) by making use of a constructor-level property, called blur. The blur property accepts a dictionary that contains the following keys: enabled, value and style. You must specify an appropriate value for the dictionary keys, otherwise the property will not be valid.

Syntax

blur

### Input Parameters

• enabled: Accepts a Boolean value that basically decides whether to enable or disable the blur-effect for the widget. This is a mandatory attribute.

• value: Level of the blur-effect that needs to be set for the widget. It should ideally be between 0 to 100. If the level is set as 0 no blur is set, even when the enabled property is set as true. This is a mandatory attribute. Even when the enabled attribute is set as false, you need to specify a numerical value to this attribute.

• style: Specifies the style in which the blur property can be applied to a widget. This is an optional parameter specific to iOS. The default value of this parameter is constants.BLUR_EFFECT_LIGHT. You can specify any of the following values to this parameter:
  • constants.BLUR_EFFECT_NONE

  • constants.BLUR_EFFECT_EXTRALIGHT

  • constants.BLUR_EFFECT_LIGHT (default)

  • constants.BLUR_EFFECT_DARK

  • constants.BLUR_EFFECT_REGULAR

  • constants.BLUR_EFFECT_PROMINENT

Read/Write

Read + Write

Remarks

• If you set enabled as true, the blur-effect for the widget is enabled.
• If you set enabled as false, the blur-effect for the widget is disabled.

• If you specify value as less than 0, the value is taken as 0.

• If you specify value as greater than 100, the value is taken as 100.

Limitations

• For Android:

  • If a FlexContainer or a FlexScrollContainer contains a Map widget, the blur-effect is not applied to the map.

  • If a FlexContainer or a FlexScrollContainer contains a Browser or Video widget, the blur-effect is applied but does not get updated. For example, when the video starts playing, the new rendered frame does not get displayed with the blur-effect.

  • Even if you apply 100% blur for widgets that display any text( such as Label or Calendar widgets), the text on these widgets is not blurred. This is a Native Android limitation. To generate the blur effect for the text, apply a skin with darker background to the Label or Calendar widget. This is true even when the widgets are placed in a FlexContainer with blur effect and the widgets do not have a skin.
  • Blur effect will not work on widgets added inside BOX containers.

Example 1

To dynamically set the blur-effect for any widget, such as a FlexContainer, use the following code.

//This is a generic property that is applicable for various widgets.
//Here, we have shown how to use the blur property for FlexContainer widget.
/*You need to make a corresponding use of the 
blur property for other applicable widgets.*/

Form1.myFlexContainer.blur = {
    "enabled": true,
    "value": 60
};

Example 2

To dynamically set the blur-effect for any widget, such as a FlexContainer in iOS, use the following code.

Form1.widget1.blur = {
    "enabled": true,
    "value": 60,
    "style": constants.BLUR_EFFECT_DARK
};

Platform Availability

• Android, iOS, Windows, SPA , and Desktop web

Specifies the border color of the widget.

Syntax

borderColor

Type

Color constant or Hexadecimal number

Read/Write

Read + Write

Remarks

• Colors can be specified using a 6 digit or an 8-digit hex value with alpha position. For example, ffff65 or ffffff00.
• When the 4-byte color format (RGBA) string is used, an alpha (A) value of 65 specifies that the color is transparent. If the value is 00, the color is opaque. The Alpha value is in percentage and must be given in the hexadecimal value for the color (100% in hexadecimal value is 65).
  For example, red complete opaque is FF000000. Red complete transparent is FF000065. The values 0x and # are not allowed in the string.
• A color constant is a String that is defined at the theme level. Ensure that you append the $ symbol at the beginning of the color constant.
• This property does not have a default value.
• This property has more priority than (and overrides) the border property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the borderColor property.

Form1.btn1.borderColor = "ea5075";

Platform Availability

• Android
• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

Specifies the multi-step gradient color for the border of the widget.

Syntax

borderColorGradient

Type

JSON Object

Read/Write

Read + Write

Input Parameters

• gradientType [Constant]: Specifies the configuration type of the gradient. This parameter can have the following constant values:

  • voltmx.skin.MULTI_STEP_GRADIENT_TYPE_TO_TOP: Constant for the gradient type toTop.
  • voltmx.skin.MULTI_STEP_GRADIENT_TYPE_TO_RIGHT: Constant for the gradient type toRight.
  • voltmx.skin.MULTI_STEP_GRADIENT_TYPE_TO_BOTTOM: Constant for the gradient type toBottom.
  • voltmx.skin.MULTI_STEP_GRADIENT_TYPE_TO_LEFT: Constant for the gradient type toLeft.
  • voltmx.skin.MULTI_STEP_GRADIENT_TYPE_CUSTOM: Constant for the gradient type custom.
    For the custom gradient type, you must specify the angle by using the angle property.
• angle [Number]: Specifies the angle for the gradient in degrees, counted counter-clockwise. This property is only applicable for the custom gradient type.
• colors [Array]: Specifies the colors for the multi-step gradient. Colors is an array of color hex values that indicate the reference color values of the gradient. This parameter contains an array of hexadecimal numbers that represent the colors or constants defined at the theme level.
• colorStops [Array]: Specifies the color stops for the multi-step gradient. Color Stops are the locations of the reference colors on the gradient, from 0 (the start of the gradient) to 100 (the final value of the gradient). This parameter contains an array of numbers that represent the color stops.

Remarks

• The default value of the gradientType key is voltmx.skin.MULTI_STEP_GRADIENT_TYPE_TO_TOP.
• Colors can be specified using a 6 digit or an 8-digit hex value with alpha position. For example, ffff65 or ffffff00.
• When the 4-byte color format (RGBA) string is used, an alpha (A) value of 65 specifies that the color is transparent. If the value is 00, the color is opaque. The Alpha value is in percentage and must be given in the hexadecimal value for the color (100% in hexadecimal value is 65).
  For example, red complete opaque is FF000000. Red complete transparent is FF000065. The values 0x and # are not allowed in the string.
• A color constant is a String that is defined at the theme level. Ensure that you append the $ symbol at the beginning of the color constant.
• This property does not have a default value.
• This property has more priority than (and overrides) the border property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the borderColorGradient property.

Form1.btn1.borderColorGradient = {
    "gradientType": voltmx.skin.MULTI_STEP_GRADIENT_TYPE_CUSTOM  
    "angle": 45,
    "colors": ["ea5075", "f1fa70", "eefd04"],
    "colorStops": [0, 90, 100]
};

Platform Availability

• Android
• iOS

Specifies the border style for the widget.

Syntax

borderStyle

Type

Constant

Read/Write

Read + Write

Remarks

• This property can have the following constant values:

  • voltmx.skin.BORDER_STYLE_PLAIN: Constant for the plain border style.
  • voltmx.skin.BORDER_STYLE_ROUNDED_CORNER: Constant for the rounded corner style.
  • voltmx.skin.BORDER_STYLE_COMPLETE_ROUNDED_CORNER: Constant for the complete rounded corner style.
  • voltmx.skin.BORDER_STYLE_CUSTOM: Constant for the custom border style.
• The cornerRadius property is only applicable when the borderStyle is voltmx.skin.BORDER_STYLE_CUSTOM.
• This property does not have a default value.
• This property has more priority than (and overrides) the border property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the borderStyle property.

Form1.btn1.borderStyle = voltmx.skin.BORDER_STYLE_PLAIN;

Platform Availability

• Android
• iOS

Specifies the width of the border for the widget in pixels.

Syntax

borderWidth

Type

Number or JSON Object

Read/Write

Read + Write

Remarks

• This property does not have a default value.
• The default unit for the value of this property is pixels.
• The Desktop Web platform supports both Number and JSON Object (with the top, bottom, right, and left keys) values for the borderWidth parameter. The Android and iOS platforms support only Number values for the borderWidth parameter.
• This property has more priority than (and overrides) the border property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the borderWidth property.

 Form1.btn1.borderWidth = 2;

Platform Availability

• Android
• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

This property determines the bottom edge of the widget and is measured from the bottom bounds of the parent container.

The bottom property determines the position of the bottom edge of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. In freeform layout, the distance is measured from the bottom edge of the parent container. In flow-vertical layout, the value is ignored. In flow-horizontal layout, the value is ignored.

The bottom property is used only if the Height property is not provided.

Syntax

bottom

Type

String

Read/Write

Read + Write

Remarks

The property determines the bottom edge of the widget and is measured from the bottom bounds of the parent container.

If the layoutType is set as voltmx.flex.FLOW_VERTICAL, the bottom property is measured from the top edge of bottom sibling widget. The vertical space between two widgets is measured from bottom of the top sibling widget and the top of the bottom sibling widget.

Example

//Sample code to set the bottom property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.bottom = "50dp";

frmHome.widgetID.bottom = "10%";

frmHome.widgetID.bottom = "10px";

Platform Availability

• Available in the IDE
• iOS, Android, Windows, SPA , and Desktop Web

This property determines the center of a widget measured from the left bounds of the parent container.

The centerX property determines the horizontal center of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. In freeform layout, the distance is measured from the left edge of the parent container. In flow-vertical layout, the distance is measured from the left edge of the parent container. In flow-horizontal layout, the distance is measured from the right edge of the previous sibling widget in the hierarchy.

Syntax

centerX

Type

String

Read/Write

Read + Write

Remarks

If the layoutType is set as voltmx.flex.FLOW_HORIZONTAL, the centerX property is measured from right edge of the left sibling widget.

Example

//Sample code to set the centerX property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.centerX = "50dp";

frmHome.widgetID.centerX = "10%";

frmHome.widgetID.centerX = "10px";

Platform Availability

• Available in the IDE
• iOS, Android, Windows, SPA, and Desktop Web

This property determines the center of a widget measured from the top bounds of the parent container.

The centerY property determines the vertical center of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. In freeform layout, the distance is measured from the top edge of the parent container. In flow-horizontal layout, the distance is measured from the top edge of the parent container. In flow-vertical layout, the distance is measured from the bottom edge of the previous sibling widget in the hierarchy.

Syntax

centerY

Type

String

Read/Write

Read + Write

Remarks

If the layoutType is set as voltmx.flex.FLOW_VERTICAL, the centerY property is measured from bottom edge of the top sibling widget.

Example

//Sample code to set the centerY property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.centerY = "50dp";

frmHome.widgetID.centerY = "10%";

frmHome.widgetID.centerY = "10px";

Platform Availability

• Available in the IDE
• iOS, Android, Windows, SPA, and Desktop Web

This property specifies whether to clip the child widgets when they go out of boundaries.

The clipBounds property specifies whether the container’s bounding box will “clip” the child widgets of the container. If set to false, all of the child widgets will be visible, even if outside of the parent container’s visible area.

Syntax

clipBounds

Type

Boolean

Read/Write

Read + Write

Remarks

The default value for this property is true.

Note: In Windows platform, setting the clipBounds property to false on FlexContainer with Free form layout may not work if FlexContainer has border width. It automatically clips.

This property does not have any effect on the following scrollable widgets:

• FlexScrollContainer
• Map
• SegmentedUI
• Browser

Example

//Sample code to set the clipBounds property of a FlexContainer widget.
//Here, the clipBounds property is used to clip the child widgets.
frmHome.flexcontainer1.clipBounds = true;

//Here, the clipBounds property shows the child widgets outside the container's bounds.
frmHome.flexcontainer1.clipBounds = false;

Platform Availability

Available in the IDE.

• iOS
• Android
• Windows
• SPA

Defines a shape to clip the widget view.

Syntax

clipView ()

Type

JSObject

Parameters

shape

Optional. A key-value pair represents a shape of the clipping. You can clip a view as follows:

VIEW_CLIP_SHAPE_RECTANGLE: The widget view is rectangle. By default, the value is set.

VIEW_CLIP_SHAPE_ROUNDED_RECTANGLE: The widget view is rectangle with rounded corners.

VIEW_CLIP_SHAPE_CIRCLE: The widget view is circular.

bounds

Optional. A key-value pair represents the bounds of the shape to clip a view. Specify the bounds as an array of integers [left, top, right, bottom].

boundsInPixel

Optional. Defines whether the units of specified bounds should be in pixels or in percentage. The property takes the Boolean value.

true: Indicates the specified bounds should be in pixels.

false: Indicates the specified bounds should be in percentage.

radius

Optional. Specifies the radius of the clipping shape. Represents the corner radius of the rounded rectangular shape when the clipping shape is VIEW_CLIP_SHAPE_ROUNDED_RECTANGLE or represents the radius of a circle when the clipping shape is VIEW_CLIP_SHAPE_CIRCLE.

Read/Write

Read + Write

Remarks

The property enables you to change the shape of a FlexContainer view. Without view clipping, all views are displayed in a regular rectangular shape. With the property, you can change the view shape to circular or rounded rectangle, irrespective of the shape of the background. Supported shapes to clipping a view are rectangle, rounded rectangle, and circle.

The clipView property is applicable only for the widgets added in the Flex Forms.

Example

//Sample code to set clipView property of a FlexContainer widget.
myForm.myFlexContainer.clipView = {
 "shape": constants.VIEW_CLIP_SHAPE_CIRCLE,
 "bounds": [5, 5, 5, 5],
 "boundsInPixel": true,
 "radius": 10
};

Platform Availability

• Android 5.0 and later versions.

Specifies the radius of the border for the widget.

Syntax

cornerRadius

Type

Number or JSON Object

Read/Write

Read + Write

Remarks

• The cornerRadius property is only applicable when the borderStyle is voltmx.skin.BORDER_STYLE_CUSTOM.
• For a Responsive Web app, a corner radius of value zero applies a plain border, and a corner radius value greater than zero applies a rounded border.
• The Android and Desktop Web platforms support both Number and JSON Object (with the top, bottom, right, and left keys) values for the cornerRadius parameter. The iOS platform supports only Number values for the cornerRadius parameter.
• The default unit for the value of this property is pixels.
• This property does not have a default value.
• This property has more priority than (and overrides) the border property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the cornerRadius property.

 Form1.btn1.cornerRadius = 60;

Platform Availability

• Android
• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

In Desktop Web applications, when you hover the mouse over any widget, a mouse pointer appears. Using the cursorType property in Iris, you can specify the type of the mouse pointer.

Syntax

cursorType

Type

String.

You must provide valid CSS cursor value such as wait, grab, help, etc. to the cursorType property.

Read/Write

Read + Write

Remarks

To add the cursorType property using Volt MX Iris in a Desktop Web application, follow these steps.

1. In Volt MX Iris, open the Desktop Web application. From the Project explorer, expand Responsive Web/ Desktop> Forms and select the form to which you need to make the changes.
2. On the canvas, select the widget for which you want to specify the cursor type. For example, button.
3. From the Properties panel, navigate to the Skin tab > Hover Skin tab.
   You will find that the details of the hover skin is not enabled here.
4. Check the Enable option to add a hover skin to your widget.
   The details and configurations of the hover skin is enabled.
5. Under the General section, for the Platform option, click the ellipsis icon.
   The Fork Skin window appears.
6. In the Fork Skin window, for Desktop, check under HTML5 SPA.
7. Click Ok. You have successfully forked your hover skin for Desktop Web application.
   You can see that the Cursor Type property has been added under the General section.
8. Select a value from the drop-down list to set the Cursor Type for the widget.

Example

 //This is a generic property and is applicable for many widgets.  
  
/*The example provided is for the Button widget. Make the required changes in the example while using other widgets.*/
  
frmButton.myButton.cursorType = "wait";

Platform Availability

• Available in IDE
• Desktop Web

Specifies the skin properties that define the look and feel of the widget, when the widget is disabled or blocked.

Syntax

disabledStateSkinProperties

Type

JSON Object

Read/Write

Read + Write

Remarks

• This property does not have a default value.
• This property has more priority than (and overrides) the disabledSkin property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the disabledStateSkinProperties property.

Form1.btn1.disabledStateSkinProperties= {  
     background: {  
        backgroundType: voltmx.skin.BACKGROUND_TYPE_MULTI_STEP_GRADIENT,  
        backgroundColorMultiStepGradient : {  
            gradientType: voltmx.skin.MULTI_STEP_GRADIENT_TYPE_TO_TOP,  
            colors: ["ea5075", "f1fa70", "eefd04"],  
            colorStops: [0, 90, 100]  
        },  
    },  
    border: {  
        borderType: voltmx.skin.BORDER_TYPE_SINGLE_COLOR,  
        borderColor: "ea5075",  
        borderStyle: voltmx.skin.BORDER_STYLE_PLAIN,  
        borderWidth: 50  
    },  
    fonts: {  
        fontColor: "ea5075",  
        fontFamily: "Serif",  
        fontSize: '100',  
        fontStyle: voltmx.skin.FONT_STYLE_NONE,  
        fontWeight: voltmx.skin.FONT_WEIGHT_NORMAL  
    },  
    textShadow: {  
        textShadowRadius: 5,  
        textShadowColor: "ea5075",  
        textShadowOffset: {  
            x: 20,  
            y: 4  
        }  
    }

Platform Availability

• Android

The enable property is used to control the actionability of the widgets. In a scenario where you want to display a widget but not invoke any action on the widget, configure the enable property to false to achieve it.

This is a constructor level property and applicable for all widgets in Volt MX Iris.

Syntax

enable

Type

Boolean

Read/Write

Read + Write

Remarks

The default value of this property is true.

When enable property is configured to true, the action associated with a widget can be invoked by the user in the application.

When enable property is configured to false, the action associated with a widget cannot be invoked by the user in the application.

Example

//This is a generic property and is applicable for many widgets.  
  
/*The example provided is for the Button widget. Make the changes required in the example while using other widgets.*/
  
frmButton.myBtn.enable= true;

Platform Availability

• Android, iOS, Windows, SPA, and Desktop web

The property enables you to improve the performance of Positional Dimension Animations.

Syntax

enableCache

Type

Boolean

Read/Write

Read + Write

Remarks

The default value for this property is true.

Note: When the property is used, application consumes more memory. The usage of the property enables tradeoff between performance and visual quality of the content. Use the property cautiously.

Example

Form1.widgetID.enableCache = true;

Platform Availability

• Available in the IDE.
• Windows

Allows you to enable or disable haptic feedback on the FlexContainer widget.

Syntax

enableHapticFeedback

Type

Boolean.
If the enableHapticFeedback property is not specified, haptic feedback is not enabled on the FlexContainer widget.

Read/Write

Read + Write

Remarks

• The enableHapticFeedback property is supported for FlexContainer widgets only when the onClick callback event is defined.

• iOS

  • The Haptic Feedback feature is available on iPhone 7 devices and later. These devices have Taptic Engine hardware and users can enable/disable Haptics from Device Settings-> Sounds & Haptics-> System Haptics.
• Android
  • Users can enable the Vibrate on touch feature from Settings-> Sound & notification-> Other sounds.
• Windows
  • Haptic Feedback is supported on Windows devices with OS build version 10.0.15063.0 or later.

Example

//Sample code to set the enableHapticFeedback property of a FlexContainer widget.
frmFlexContainer.myFlexContainer.enableHapticFeedback=true;

Platform Availability

• Android

• iOS
• Windows

Specifies the skin properties that define the look and feel of the widget, when the widget is in focus.

Syntax

focusStateSkinProperties

Type

JSON Object

Read/Write

Read + Write

Remarks

• This property does not have a default value.
• This property has more priority than (and overrides) the focusSkin property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the focusStateSkinProperties property.

 Form1.btn1.focusStateSkinProperties = {  
     background: {  
        backgroundType: voltmx.skin.BACKGROUND_TYPE_MULTI_STEP_GRADIENT,  
        backgroundColorMultiStepGradient : {  
            gradientType: voltmx.skin.MULTI_STEP_GRADIENT_TYPE_TO_TOP,  
            colors: ["ea5075", "f1fa70", "eefd04"],  
            colorStops: [0, 90, 100]  
        }  
    },  
    border: {  
        borderType: voltmx.skin.BORDER_TYPE_SINGLE_COLOR,  
        borderColor: "ea5075",  
        borderStyle: voltmx.skin.BORDER_STYLE_PLAIN,  
        borderWidth: 5  
    },  
    fonts: {  
        fontColor: "ea5075",  
        fontFamily: "Serif",  
        fontSize: '100',  
        fontStyle: voltmx.skin.FONT_STYLE_NONE,  
        fontWeight: voltmx.skin.FONT_WEIGHT_NORMAL  
    },  
    textShadow: {  
        textShadowRadius: 5,  
        textShadowColor: "ea5075",  
        textShadowOffset: {  
            x: 20,  
            y: 4  
        }  
    }

Platform Availability

• Android
• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

Specifies the font color of the widget.

Syntax

fontColor

Type

Color constant or Hexadecimal number

Read/Write

Read + Write

Remarks

• Colors can be specified using a 6 digit or an 8-digit hex value with alpha position. For example, ffff65 or ffffff00.
• When the 4-byte color format (RGBA) string is used, an alpha (A) value of 65 specifies that the color is transparent. If the value is 00, the color is opaque. The Alpha value is in percentage and must be given in the hexadecimal value for the color (100% in hexadecimal value is 65).
  For example, red complete opaque is FF000000. Red complete transparent is FF000065. The values 0x and # are not allowed in the string.
• A color constant is a String that is defined at the theme level. Ensure that you append the $ symbol at the beginning of the color constant.
• This property does not have a default value.
• This property has more priority than (and overrides) the fonts property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the fontColor property.

Form1.btn1.fontColor = "ea5075";

Platform Availability

• Android
• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

Specifies the font family for the font of the widget.

Syntax

fontFamily

Type

String

Read/Write

Read + Write

Remarks

• This property does not have a default value.
• This property has more priority than (and overrides) the fonts property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the fontFamily property.

 Form1.btn1.fontFamily = "Serif";

Platform Availability

• Android
• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

Specifies the font size for the widget in percentage (%) units.

Syntax

fontSize

Type

Number

Read/Write

Read + Write

Remarks

• This property does not have a default value.
• This property has more priority than (and overrides) the fonts property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the fontSize property.

 Form1.btn1.fontSize = 150;

Platform Availability

• Android
• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

Specifies the font style for the widget.

Syntax

fontStyle

Type

Constant

Read/Write

Read + Write

Remarks

• This property can have the following constant values:

  • voltmx.skin.FONT_STYLE_NONE: Constant for the normal font style.
  • voltmx.skin.FONT_STYLE_ITALIC: Constant for the italic font style.
  • voltmx.skin.FONT_STYLE_UNDERLINE: Constant for the underline font style.
• This property does not have a default value.
• This property has more priority than (and overrides) the fonts property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the fontStyle property.

Form1.btn1.fontStyle = voltmx.skin.FONT_STYLE_NONE;

Platform Availability

• Android
• Desktop Web (Not available on Desktop Web Legacy SDK)

Specifies the weight for the font of the widget.

Syntax

fontWeight

Type

Constant

Read/Write

Read + Write

Remarks

• This property can have the following constant values:

  • voltmx.skin.FONT_WEIGHT_NORMAL: Constant for the normal font weight.
  • voltmx.skin.FONT_WEIGHT_BOLD: Constant for the bold font weight.
• This property does not have a default value.
• This property has more priority than (and overrides) the fonts property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the fontWeight property.

Form1.btn1.fontWeight = voltmx.skin.FONT_WEIGHT_NORMAL;

Platform Availability

• Android
• Desktop Web (Not available on Desktop Web Legacy SDK)

The frame property reflects the calculated flex layout properties derived at application runtime. If a widget’s calculated position, width, or height has been manipulated at runtime, the frame property will reflect the final derived value. The frame property is a JSObject with the keys (x, y, width, height) measured in default system units.

Syntax

frame

Type

JSObject

Read/Write

Read only

Remarks

The frame values are correct when you app is processing the doLayout event. Accessing the frame property in the postShow event handler is not suggested as the layout cycles are still being calculated and the frame values might not be up to date.

Example

Getting the frame property on an existing widget

//Getting the derived width of an existing widget
var flexcontainerWidth = frmHome.flexcontainer1.frame.width;

//Getting the derived height of an existing widget
var flexcontainerWidth = frmHome.flexcontainer1.frame.height;

//Getting the derived left position of an existing widget
var flexcontainerLeft = frmHome.flexcontainer1.frame.x;

//Getting the derived top position of an existing widget
var flexcontainerTop = frmHome.flexcontainer1.frame.y;

//Getting all the derived frame properties of an existing widget
var flexcontainerFrame = frmHome.flexcontainer1.frame;

Platform Availability

Not available in the IDE.

• iOS
• Android
• Windows
• SPA

It determines the height of the widget and measured along the y-axis.

The height property determines the height of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. For supported widgets, the height may be derived from either the widget or container’s contents by setting the height to “preferred”.

Syntax

height

Type

Number, String, and Constant

Read/Write

Read + Write

Remarks

Following are the available measurement options:

• %: Specifies the values in percentage relative to the parent dimensions.
• px: Specifies the values in terms of device hardware pixels.
• dp: Specifies the values in terms of device independent pixels.
• default: Specifies the default value of the widget.
• voltmx.flex.USE_PREFERED_SIZE: When this option is specified, the layout uses preferred height of the widget as height and preferred size of the widget is determined by the widget and may varies between platforms.

Example

/*Sample code to set the height property for a FlexContainer widget by using DP, Percentage and Pixels.*/
frmFlexContainer.myFlexContainer.height="50dp";

frmFlexContainer.myFlexContainer. height="10%";

frmFlexContainer.myFlexContainer. height="10px";

Platform Availability

• Available in the IDE
• iOS
• Android
• Windows
• SPA

Specifies the skin properties that define the look and feel of the widget, when the cursor hovers on the widget.

Syntax

hoverStateSkinProperties

Type

JSON Object

Read/Write

Read + Write

Remarks

• This property does not have a default value.
• This property has more priority than (and overrides) the hoverSkin property of the configured skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the hoverStateSkinProperties property.

 Form1.btn1.hoverStateSkinProperties = {  
     background: {  
        backgroundType: voltmx.skin.BACKGROUND_TYPE_MULTI_STEP_GRADIENT,  
        backgroundColorMultiStepGradient : {  
            gradientType: voltmx.skin.MULTI_STEP_GRADIENT_TYPE_TO_TOP,  
            colors: ["ea5075", "f1fa70", "eefd04"],  
            colorStops: [0, 90, 100]  
        }  
    },  
    border: {  
        borderType: voltmx.skin.BORDER_TYPE_SINGLE_COLOR,  
        borderColor: "ea5075",  
        borderStyle: voltmx.skin.BORDER_STYLE_PLAIN,  
        borderWidth: 5  
    },  
    fonts: {  
        fontColor: "ea5075",  
        fontFamily: "Serif",  
        fontSize: '100',  
        fontStyle: voltmx.skin.FONT_STYLE_NONE,  
        fontWeight: voltmx.skin.FONT_WEIGHT_NORMAL  
    },  
    textShadow: {  
        textShadowRadius: 5,  
        textShadowColor: "ea5075",  
        textShadowOffset: {  
            x: 20,  
            y: 4  
        }  
    }

Platform Availability

• Desktop Web (Not available on Desktop Web Legacy SDK)

id is a unique identifier of FlexContainer consisting of alpha numeric characters. Every FlexContainer should have a unique id within an application.

Syntax

id

Type

String - [Mandatory]

Read/Write

Read only

Example

//Defining properties for FlexContainer on a FlexForm
function addWidgetstestfrm() {
    var flexContainer1 = new voltmx.ui.FlexContainer({
        "id": "flexContainer1",
        "top": "19dp",
        "left": "43dp",
        "width": "304dp",
        "height": "251dp",
        "zIndex": 1,
        "isVisible": true,
        "clipBounds": true,
        "layoutType": voltmx.flex.FREE_FORM
    }, {
        "padding": [0, 0, 0, 0]
    }, {});
    flexContainer1.setDefaultUnit(voltmx.flex.DP);
    flexContainer1.add();
    testfrm.add(
        flexContainer1);
}

function testfrmGlobals() {
    var MenuId = [];
    testfrm = new voltmx.ui.Form2({
        "id": "testfrm",
        "width": "50dp",
        "height": "30dp",
        "zIndex": 1,
        "zoomScale": 22,
        "minZoomScale": 1.0,
        "maxZoomScale": 1.0,
        "layoutType": voltmx.flex.FREE_FORM,
        "addWidgets": addWidgetstestfrm
    }, {
        "padding": [0, 0, 0, 0],
        "displayOrientation": constants.FORM_DISPLAY_ORIENTATION_PORTRAIT,
        "paddingInPixel": false
    }, {
        "retainScrollPosition": true

    });
    testfrm.setDefaultUnit(voltmx.flex.PX);
}

Platform Availability

Available in the IDE.

• iOS
• Android
• Windows
• SPA

A custom JSObject with the key value pairs that a developer can use to store the context with the widget. This will help in avoiding the globals to most part of the programming.

Syntax

info

Type

JSObject

Read/Write

Read + Write

Remarks

Note: This is a non-Constructor property. You cannot set this property through widget constructor. But you can read and write data to it.

Info property can hold any JSObject. After assigning the JSObject to info property, the JSObject should not be modified. For example,

var inf = {
    a: "hello"
};
widget.info = inf; //works
widget.info.a = "hello world";
//This will not update the widget info a property to hello world. 
//widget.info.a will have old value as hello.

Example

//Sample code to set info property for a FlexContainer widget.

frmFlexContainer.myFlexContainer.info = {
    key: "FlexContainerName"
};

//Reading the info of the FlexContainer widget.
voltmx.print("FlexContainer widget info ::" +frmFlexContainer.myFlexContainer.info);

Platform Availability

Not available in the IDE.

• iOS, Android, Windows, SPA

Specifies whether the container is a master container.

Syntax

isMaster

Type

Boolean

Read/Write

Read Only after initialization.

Remarks

If the isMaster property is true, the current widget is a master container and all of the rules and limitations of master containers apply to it. For more information, please see Masters in the Overviews section of this guide, as well as Using Masters in the Iris User Guide.

Your app can set the isMaster property in this container’s constructor. After that, this property is read-only.

Example

var isMasterContainer = flexContainer1.isMaster;

When you use the FlexContainer as a popup, this property helps to prevent user interaction beyond the edges of the FlexContainer.

Syntax

isModalContainer

Type

Boolean

Read/Write

Read + Write

Remarks

A modal window is a child window that requires user interaction before the control goes to the parent window. When a child window opens from a parent window (such as a popup), to make the parent window non-interactive , set the isModalContainer property as true.

The default value of this property is false.

Note: If ModalContainer property is set to true in any of the FlexContainer widget, the Z Index value of that container and all of its parent containers should be set to Custom.

Example

Form1.FlexPopup.isModalContainer = true;

Platform Availability

• Available in IDE
• iOS
• Android
• Windows
• SPA
• Desktop web

This property controls the visibility of a widget on the FlexContainer.

Syntax

isVisible

Type

Boolean

Read/Write

Read + Write

Remarks

The default value for this property is true.

Example

//Sample code to set isVisible property for a FlexContainer widget.
frmFlexContainer.myFlexContainer.isVisible=true;

Platform Availability

Available in the IDE.

• iOS
• Android
• Windows
• SPA

Specifies if the arrangement of the widgets either in free form or horizontal or vertical direction.

Syntax

layoutType

Type

Number

Read/Write

Read + Write

Remarks

The default value for this property is voltmx.flex.FREE_FORM.

Note: This property can only be set during widget construction.

The available options are:

• voltmx.flex.FREE_FORM: The calculations for free form layout type are:
  • left is measured from the left bounds of the parent, right is measured from the right bounds of the parent and centerX measured from the left bounds of the parent.
  • top is measured from the top bounds of the parent, bottom is measured from the bottom bounds of the parent and centerY measured from the bop bounds of the parent.
  • For x-axis values are width, left, right, centerX in case of % units are relative to parent’s width.
  • For y-axis values are height, top, bottom, centerY in case of % units are relative to parent’s height.
• voltmx.flex.FLOW_HORIZONTAL: The calculations for horizontal layout type are:
  • left is measured from right edge of the left sibling widget and right is measured from the left edge of the right sibling widget.
  • horizontal space between two widgets is right of the left sibling widget + left of the right sibling widget.
  • order of the widgets appearing in the flow is the order in which the widgets are added.
  • top and bottom properties are measured from the boundaries of the parent.

• voltmx.flex.FLOW_VERTICAL: The calculations for vertical layout type are:

  • top is measured from bottom edge of the top sibling widget and bottom is measured from the top edge of bottom sibling widget.
  • vertical space between two widgets is bottom of the top sibling widget + top of the bottom sibling widget.
  • order of the widgets appearing in the flow is the order in which the widgets are added.
  • left and right properties are measured from the boundaries of the parent.
• voltmx.flex.RESPONSIVE_GRID: When you assign the value of the layoutType property as voltmx.flex.RESPONSIVE_GRID, you can assign different layouts for different breakpoints. Here are the some of the things to consider when you assign the Responsive Grid layout.
  • Widgets are aligned from left to right with the span and offset values provided in the Look tab of the Properties panel.
  • You can only provide FlexContainer widget as the direct child after assigning this value to the parent.
  • The FlexContainer cell respects height, minHeight, maxHeight property only.
  • If the width of a child widget exceeds the width of the container widget, the next child widget is wrapped and placed in the next row.

Example

//Sample code to set layoutType property for a FlexContainer widget.
frmFlexContainer.myFlexContainer.layoutType=voltmx.flex.FREE_FORM;

Platform Availability

Available in the IDE.

• iOS
• Android
• Windows
• SPA

This property determines the lower left corner edge of the widget and is measured from the left bounds of the parent container.

The left property determines the position of the left edge of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. In freeform layout, the distance is measured from the left edge of the parent container. In flow-vertical layout, the distance is measured from the left edge of the parent container. In flow-horizontal layout, the distance is measured from the right edge of the previous sibling widget in the hierarchy.

Syntax

left

Type

String

Read/Write

Read + Write

Remarks

If the layoutType is set as voltmx.flex.FLOW_HORIZONTAL, the left property is measured from right edge of the left sibling widget.

Example

//Sample code to set the left property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.left = "50dp";

frmHome.widgetID.left = "10%";

frmHome.widgetID.left = "10px";

Platform Availability

• Available in the IDE
• iOS, Android, Windows, SPA, and Desktop Web

This property specifies the maximum height of the widget and is applicable only when the height property is not specified.

The maxHeight property determines the maximum height of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. The maxHeight value overrides the preferred, or “autogrow” height, if the maxHeight is less than the derived content height of the widget.

Syntax

maxHeight

Type

Number

Read/Write

Read + Write

Example

//Sample code to set the maxHeight property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.maxHeight = "50dp";

frmHome.widgetID.maxHeight = "10%";

frmHome.widgetID.maxHeight = "10px";

Platform Availability

• Available in the IDE
• iOS, Android, Windows, SPA, and Desktop Web

This property specifies the maximum width of the widget and is applicable only when the width property is not specified.

The Width property determines the maximum width of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. The maxWidth value overrides the preferred, or “autogrow” width, if the maxWidth is less than the derived content width of the widget.

Syntax

maxWidth

Type

Number

Read/Write

Read + Write

Example

//Sample code to set the maxWidth property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.maxWidth = "50dp";

frmHome.widgetID.maxWidth = "10%";

frmHome.widgetID.maxWidth = "10px";

Platform Availability

• Available in the IDE
• iOS, Android, Windows, SPA, and Desktop Web

This property specifies the minimum height of the widget and is applicable only when the height property is not specified.

The minHeight property determines the minimum height of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. The minHeight value overrides the preferred, or “autogrow” height, if the minHeight is larger than the derived content height of the widget.

Syntax

minHeight

Type

Number

Read/Write

Read + Write

Example

//Sample code to set the minHeight property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.minHeight = "50dp";

frmHome.widgetID.minHeight = "10%";

frmHome.widgetID.minHeight = "10px";

Platform Availability

• Available in the IDE
• iOS, Android, Windows, SPA, and Desktop Web

This property specifies the minimum width of the widget and is applicable only when the width property is not specified.

The minWidth property determines the minimum width of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. The minWidth value overrides the preferred, or “autogrow” width, if the minWidth is larger than the derived content width of the widget.

Syntax

minWidth

Type

Number

Read/Write

Read only

Example

//Sample code to set the minWidth property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.minWidth = "50dp";

frmHome.widgetID.minWidth = "10%";

frmHome.widgetID.minWidth = "10px";

Platform Availability

• Available in the IDE
• iOS, Android, Windows, SPA, and Desktop Web

Specifies the opacity of the widget. The value of this property must be in the range 0.0 (transparent) to 1.0 (opaque). Any values outside this range are fixed to the nearest minimum or maximum value.

Specifies the opacity of the widget. Valid opacity values range from 0.0 (transparent), to 1.0 (opaque). Values set to less than zero will default to zero. Values more than 1.0 will default to 1. Interaction events set on a transparent widget will still be fired. To disable the events, also set the “isVisible” property to “false”.

Syntax

opacity

Type

Number

Read/Write

Read + Write

Remarks

Note: This property has more priority compared to the values coming from the configured skin.

Example

//Sample code to make the widget transparent by using the opacity property.
frmHome.widgetID.opacity = 0;

//Sample code to make the widget opaque by using the opacity property.
frmHome.widgetID.opacity = 1;

Platform Availability

• Not available in the IDE.
• iOS, Android, Windows, SPA, and Desktop Web

Helps you access the parent of the widget. If the widget is not part of the widget hierarchy, the parent property returns null.

Syntax

parent

Read/Write

Read only

Remarks

Note: The property works for all the widgets inside a FlexForm, FlexContainer or FlexScrollContainer.

Example

function func() {

    voltmx.print("The parent of the widget" + JSON.stringify(Form1.widgetID.parent));

}

Platform Availability

• Not available in the IDE
• iOS, Android, Windows, SPA, and Desktop Web

Specifies the skin properties that define the look and feel of the widget, when the widget is pressed or clicked.

Syntax

pressedStateSkinProperties

Type

JSON Object

Read/Write

Read + Write

Remarks

• This property does not have a default value.
• This property has more priority than (and overrides) the pressedSkin property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the pressedStateSkinProperties property.

Form1.btn1.pressedStateSkinProperties = {  
     background: {  
        backgroundType: voltmx.skin.BACKGROUND_TYPE_MULTI_STEP_GRADIENT,  
        backgroundColorMultiStepGradient : {  
            gradientType: voltmx.skin.MULTI_STEP_GRADIENT_TYPE_TO_TOP,  
            colors: ["ea5075", "f1fa70", "eefd04"],  
            colorStops: [0, 90, 100]  
        }  
    },  
    border: {  
        borderType: voltmx.skin.BORDER_TYPE_SINGLE_COLOR,  
        borderColor: "ea5075",  
        borderStyle: voltmx.skin.BORDER_STYLE_PLAIN,  
        borderWidth: 5  
    },  
    fonts: {  
        fontColor: "ea5075",  
        fontFamily: "Serif",  
        fontSize: '100',  
        fontStyle: voltmx.skin.FONT_STYLE_NONE,  
        fontWeight: voltmx.skin.FONT_WEIGHT_NORMAL  
    },  
    textShadow: {  
        textShadowRadius: 5,  
        textShadowColor: "ea5075",  
        textShadowOffset: {  
            x: 20,  
            y: 4  
        }  
    }

Platform Availability

• Android

This property is used to make different layouts for different breakpoints in FlexContainer widgets. You can assign the width and space between FlexContainers for each breakpoint as per your requirement.

For more information about the Simple Responsive design, click here.

Syntax

responsiveConfig

Type

JSON object.

The following table shows the attributes that can be assigned to the responsiveConfig property.

Read/Write

No- Constructor level property

Example 1

/*Sample code to set the responsiveConfig property to a FlexContainer widget in Desktop Web platform.*/
var myFlex = new voltmx.ui.FlexContainer({
 "responsiveConfig": {
  "span": {
   "640": 6,
   "768": 4,
   "1200": 3,
   "1366": 2
  },
  "offset": {
   "640": 0,
   "768": 1,
   "1366": 2
  },
 },
 "height": "100%",
 "id": "myFlex",
 "layoutType": voltmx.flex.FLOW_HORIZONTAL
}, {}, {});

Example 2

/*Sample code to set the responsiveConfig property to a FlexContainer widget in Mobile and Tablet platforms.*/
var myFlex = new voltmx.ui.FlexContainer({
 "responsiveConfig": {
  "span": {
   "portrait": 6,
   "landscape": 3
  },
  "offset": {
   "portrait": 0,
   "landscape": 0
  },
 },
 "height": "100%",
 "id": "myFlex",
 "layoutType": voltmx.flex.FLOW_HORIZONTAL
}, {}, {});

Platform Availability

• Available in the IDE
• iOS, Android, Windows, SPA, and Desktop Web

This property is used to retain the content alignment property value, as it was defined.

Note: Locale-level configurations take priority when invalid values are given to this property, or if it is not defined.

The mirroring widget layout properties should be defined as follows.

function getIsFlexPositionalShouldMirror(widgetRetainFlexPositionPropertiesValue) {
    return (isI18nLayoutConfigEnabled &&
    localeLayoutConfig[defaultLocale]
    ["mirrorFlexPositionalProperties"] == true &&
    !widgetRetainFlexPositionPropertiesValue);
}

The following table illustrates how widgets consider Local flag and Widget flag values.

Syntax

retainContentAlignment

Type

Boolean

Read/Write

No (only during widget-construction time)

Example

//This is a generic property that is applicable for various widgets.
//Here, we have shown how to use the retainContentAlignment property for Button widget.
/*You need to make a corresponding use of the 
retainContentAlignment property for other applicable widgets.*/
var btn = new voltmx.ui.Button({
    "focusSkin": "defBtnFocus",
    "height": "50dp",
    "id": "myButton",
    "isVisible": true,
    "left": "0dp",
    "skin": "defBtnNormal",
    "text": "text always from top left",
    "top": "0dp",
    "width": "260dp",
    "zIndex": 1
}, {
    "contentAlignment": constants.CONTENT_ALIGN_TOP_LEFT,
    "displayText": true,
    "padding": [0, 0, 0, 0],
    "paddingInPixel": false,
    "retainFlexPositionProperties": false,
    "retainContentAlignment": true
}, {});

Platform Availability

• Available in IDE
• Windows, iOS, Android, and SPA

This property is used to retain flex positional property values as they were defined. The flex positional properties are left, right, and padding.

Note: Locale-level configurations take priority when invalid values are given to this property, or if it is not defined.

The mirroring widget layout properties should be defined as follows.

function getIsFlexPositionalShouldMirror(widgetRetainFlexPositionPropertiesValue) {
    return (isI18nLayoutConfigEnabled &&
    localeLayoutConfig[defaultLocale]
    ["mirrorFlexPositionalProperties"] == true &&
    !widgetRetainFlexPositionPropertiesValue);
}

The following table illustrates how widgets consider Local flag and Widget flag values.

Syntax

retainFlexPositionProperties

Type

Boolean

Read/Write

No (only during widget-construction time)

Example

//This is a generic property that is applicable for various widgets.
//Here, we have shown how to use the retainFlexPositionProperties property for Button widget.
/*You need to make a corresponding use of the 
retainFlexPositionProperties property for other applicable widgets.*/
var btn = new voltmx.ui.Button({
    "focusSkin": "defBtnFocus",
    "height": "50dp",
    "id": "myButton",
    "isVisible": true,
    "left": "0dp",
    "skin": "defBtnNormal",
    "text": "always left",
    "top": "0dp",
    "width": "260dp",
    "zIndex": 1
}, {
    "contentAlignment": constants.CONTENT_ALIGN_CENTER,
    "displayText": true,
    "padding": [0, 0, 0, 0],
    "paddingInPixel": false,
    "retainFlexPositionProperties": true,
    "retainContentAlignment": false
}, {});

Platform Availability

• Available in IDE
• Windows, iOS, Android, and SPA

This property is used to convert Flow Horizontal Left to Flow Horizontal Right.

Note: Locale-level configurations take priority when invalid values are given to this property, or if it is not defined.

The mirroring widget layout properties should be defined as follows.

function getIsFlexPositionalShouldMirror(widgetRetainFlexPositionPropertiesValue) {
    return (isI18nLayoutConfigEnabled &&
    localeLayoutConfig[defaultLocale]
    ["mirrorFlexPositionalProperties"] == true &&
    !widgetRetainFlexPositionPropertiesValue);
}

The following table illustrates how widgets consider Local flag and Widget flag values.

Syntax

retainFlowHorizontalAlignment

Type

Boolean

Read/Write

No (only during widget-construction time)

Example

//This is a generic property that is applicable for various widgets.
//Here, we have shown how to use the retainFlowHorizontalAlignment property for Button widget.
/*You need to make a corresponding use of the 
retainFlowHorizontalAlignment property for other applicable widgets. */
var btn = new voltmx.ui.Button({
 "focusSkin": "defBtnFocus",
 "height": "50dp",
 "id": "myButton",
 "isVisible": true,
 "left": "0dp",
 "skin": "defBtnNormal",
 "text": "always left",
 "top": "0dp",
 "width": "260dp",
 "zIndex": 1
}, {
 "contentAlignment": constants.CONTENT_ALIGN_CENTER,
 "displayText": true,
 "padding": [0, 0, 0, 0],
 "paddingInPixel": false,
 "retainFlexPositionProperties": true,
 "retainContentAlignment": false,
 "retainFlowHorizontalAlignment ": false
}, {});

Platform Availability

• Available in IDE
• Windows, iOS, Android, and SPA

The reverseLayoutDirection property specifies the stacking order of the child widgets of FlexContainer. It is not applicable when the value of the layout### Type Property is voltmx.flex.FREE_FORM.

The default value of the property is false.

Syntax

reverseLayoutDirection

Type

Boolean

Read / Write

Read + Write

Remarks

1. If the value of reverseLayoutDirection property is set as false:
   • When the value of layoutType property is, voltmx.flex.FLOW_HORIZONTAL, the child widgets are stacked from left to right.
   • When the value of layoutType property is, voltmx.flex.FLOW_VERTICAL, the child widgets are stacked from top to bottom.
2. If the value of reverseLayoutDirection property is set as true:
   • When the value of layoutType property is, voltmx.flex.FLOW_HORIZONTAL, the child widgets are stacked from right to left.
   • When the value of layoutType property is, voltmx.flex.FLOW_VERTICAL, the child widgets are stacked from bottom to top.

Limitations

• When the value of reverseLayoutDirection property is true, the frame values of the child widgets are calculated with respect to the left property of FlexContainer. The frame values given for different features of FlexContainer widget, such as animation, must reflect this change.

Example

You can change the flow layout direction of a FlexContainer with ID as “flexContainer1” in form “myForm” during run time by entering the following code.

//Sample code to enable reverseLayoutDirection property for a FlexContainer widget. myForm.myFlexContainer.reverseLayoutDirection = true;

Platform Availability

• Available in the IDE
• iOS, Android, Windows, Desktop Web, and SPA

This property determines the lower right corner of the widget and is measured from the right bounds of the parent container.

The right property determines the position of the right edge of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. In freeform layout, the distance is measured from the left edge of the parent container. In flow-vertical layout, value is ignored. In flow-horizontal layout, the value is ignored.

The right property is used only if the width property is not provided.

Syntax

right

Type

String

Read/Write

Read + Write

Remarks

If the layoutType is set as voltmx.flex.FLOW_HORIZONTAL, the right property is measured from left edge of the right sibling widget. The horizontal space between two widgets is measured from right of the left sibling widget and left of the right sibling widget.

Example

//Sample code to set the right property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.right = "50dp";

frmHome.widgetID.right = "10%";

frmHome.widgetID.right = "10px";

Platform Availability

• Available in the IDE
• iOS, Android, Windows, SPA, and Desktop Web

Defines the ripple background for a FlexContainer Widget.

Syntax

rippleBackground

Type

JSObject

Parameters

rippleColor

Optional. Defines the color for the ripples.

You can define the ripple color in the RGBA format, where the R, G, and B range from 00 to ff, and the A (transparency) ranges from 00 (zero percent) to 64 (100 percent). Or, you can define the rippleColor as a key-value pair for each view state. The keys allowed are normal and pressed.

contentLayers

Optional. Array of two JS Objects. Each JS Object contains following key-value pairs to define a layer for ripple background. You can define the background for the ripple as a skin or as a background color.

background

Defines the background for the ripples. You can define the color in the RGBA format, where the R, G, and B range from 00 to ff, and the A (transparency) ranges from 00 (zero percent) to 64 (100 percent). Or, you can specify a skin as the background.

backgroundType

Defines the type of a background. You can define:

RIPPLE_CONTENT_LAYER_COLOR: Background as color in the RGBA format.

RIPPLE_CONTENT_LAYER_SKIN: Background as a skin.

Mask

Defines the bounds for the ripple animation. The property takes the Boolean value and by default is set to false.

padding

Defines the space around the ripple background. Specify an array of four integers [left, top, right, bottom]

paddingInPixel

Defines whether the units of specified padding values should be in pixels or in percentage. The property takes the Boolean value.

true: Indicates the specified padding values should be in pixels.

false: Indicates the specified padding values should be in percentage.

paddingMode

Optional. Defines how layer padding should affect the bounds of subsequent layers. You can define:

RIPPLE_PADDING_MODE_NEST: Nests each layer inside padding of the previous layer.

RIPPLE_PADDING_MODE_STACK: Stacks each layer on top of the previous layer. This is the default value.

Read/Write

Read + Write

Remarks

If you set rippleBackground, skin, and focusSkin properties to the FlexContainer Widget through a constructor, the rippleBackground property takes the priority. Later, if you modify or set the skin properties such as skin, focusSkin, pressedSkin, and disabledSkins dynamically, the skin properties take priority.

Example

//Sample code to set the rippleBackground property for a FlexContainer widget. 
myForm.myFlexContainer.rippleBackground = {
 rippleColor: "ffff0000",
 contentLayers: [{
  background: "ffffff00",
  backgroundType: constants.RIPPLE_CONTENT_LAYER_COLOR,
  mask: false,
  padding: [10, 10, 10, 10]
 }, {
  background: btnSkin,
  backgroundType: constants.RIPPLE_CONTENT_LAYER_SKIN,
  mask: true
 }],
 paddingMode: constants.PADDING_MODE_NEST
};

Platform Availability

• Android 5.0 and later versions.

Specifies the color for the shadow of the widget.

Syntax

shadowColor

Type

Color constant or Hexadecimal number

Read/Write

Read + Write

Remarks

• Colors can be specified using a 6 digit or an 8-digit hex value with alpha position. For example, ffff65 or ffffff00.
• When the 4-byte color format (RGBA) string is used, an alpha (A) value of 65 specifies that the color is transparent. If the value is 00, the color is opaque. The Alpha value is in percentage and must be given in the hexadecimal value for the color (100% in hexadecimal value is 65).
  For example, red complete opaque is FF000000. Red complete transparent is FF000065. The values 0x and # are not allowed in the string.
• A color constant is a String that is defined at the theme level. Ensure that you append the $ symbol at the beginning of the color constant.
• This property does not have a default value.
• This property has more priority than (and overrides) the shadow property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the shadowColor property.

Form1.btn1.shadowColor = "ea5075";

Platform Availability

• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

Defines the depth of the shadow effect applied to the FlexContainer Widget.

Syntax

shadowDepth

Type

Number

Read/Write

Read + Write

Remarks

The depth of the shadow should be specified in DP (Device Independent Pixels) units. The higher the value of shadowDepth, the appearance of the FlexContainer Widget is elevated from the screen and the casted shadow becomes soft.

Example

//Sample code to set shadowDepth property for a FlexContainer widget.   
  
myForm.myFlexContainer.shadowDepth=10;

Platform Availability

• Android 5.0 and later versions.

This property specifies the current coordinates of the shadow region in the widget.

Syntax

shadowOffset

Type

JSON Object

Read/Write

Read + Write

Remarks

• The JSON Object contains the X-coordinate and Y-coordinates for the offset in the following format:

  {x: value in pixels, y: value in pixels}

• The default unit for the value of this property is pixels.
• This property does not have a default value.
• This property has more priority than (and overrides) the shadow property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the shadowOffset property.

Form1.btn1.shadowOffset= {
    "x": "3",
    "y": "27"
};

Platform Availability

• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

Specifies the radius for the blur value of the shadow.

Syntax

shadowRadius

Type

Number

Read/Write

Read + Write

Remarks

• The default value of the shadowRadius property for a Responsive Web app is 0.
• The default unit for the value of this property is pixels.
• This property does not have a default value.
• This property has more priority than (and overrides) the shadow property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the shadowRadius property.

 Form1.btn1.shadowRadius = 6;

Platform Availability

• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

Sets a type of the shadow effect to apply to the FlexContainer Widget.

Syntax

shadowType

Type

Number

Read/Write

Read + Write

Remarks

The property specifies a shape for the widget’s shadow that is cast. You can apply any one of the following shadow types:

VIEW_BOUNDS_SHADOW: Shadow matches the widget’s rectangular bounds.

PADDED_VIEW_BOUNDS_SHADOW: Shadow matches the widget’s rectangular padded bounds.

BACKGROUND_SHADOW: Shadow matches the widget’s background. This is the default value.

Example

//Sample code to set the shadowType property for a FlexContainer widget.   
  
myForm.myFlexContainer.shadowType = constants.VIEW_BOUNDS_SHADOW; 

Example

Platform Availability

• Android 5.0 and later versions.

This property specifies a background skin for FlexContainer widget.

Syntax

skin

Type

String

Read/Write

Read + Write

Example

//Sample code to set skin property for a FlexContainer widget.   
  
myForm.myFlexContainer.skin="sknred"; 

Platform Availability

Available in the IDE.

• iOS
• Android
• Windows
• SPA

Specifies the color for the text shadow of the widget.

Syntax

textShadowColor

Type

Color constant or Hexadecimal number

Read/Write

Read + Write

Remarks

• Colors can be specified using a 6 digit or an 8-digit hex value with alpha position. For example, ffff65 or ffffff00.
• When the 4-byte color format (RGBA) string is used, an alpha (A) value of 65 specifies that the color is transparent. If the value is 00, the color is opaque. The Alpha value is in percentage and must be given in the hexadecimal value for the color (100% in hexadecimal value is 65).
  For example, red complete opaque is FF000000. Red complete transparent is FF000065. The values 0x and # are not allowed in the string.
• A color constant is a String that is defined at the theme level. Ensure that you append the $ symbol at the beginning of the color constant.
• This property does not have a default value.
• This property has more priority than (and overrides) the textShadow property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the textShadowColor property.

Form1.btn1.textShadowColor = "ea5075";

Platform Availability

• Android
• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

This property specifies the current coordinates of the text shadow region in the widget.

Syntax

textShadowOffset

Type

JSON Object

Read/Write

Read + Write

Remarks

• The JSON Object contains the X-coordinate and Y-coordinates for the offset in the following format:

  {x: value in pixels, y: value in pixels}

• The default unit for the value of this property is pixels.
• This property does not have a default value.
• This property has more priority than (and overrides) the textShadow property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the textShadowOffset property.

Form1.btn1.textShadowOffset = {
    "x": "2",
    "y": "24"
};

Platform Availability

• Android
• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

Specifies the radius for the blur value of the text shadow.

Syntax

textShadowRadius

Type

Number

Read/Write

Read + Write

Remarks

• The default value of the textShadowRadius property for a Responsive Web app is 0.
• The default unit for the value of this property is pixels.
• This property does not have a default value.
• This property has more priority than (and overrides) the textShadow property of the configured skin. Even if there is no skin configured for the widget, this property updates the skin.

Example

This example uses the button widget, but the principle remains the same for all widgets that have the textShadowRadius property.

 Form1.btn1.textShadowRadius = 6;

Platform Availability

• Android
• iOS
• Desktop Web (Not available on Desktop Web Legacy SDK)

This property determines the top edge of the widget and measured from the top bounds of the parent container.

The top property determines the position of the top edge of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. In freeform layout, the distance is measured from the top edge of the parent container. In flow-vertical layout, the distance is measured from the bottom edge of the previous sibling widget in the hierarchy. In flow-horizontal layout, the distance is measured from the left edge of the parent container.

Syntax

top

Type

String

Read/Write

Read + Write

Remarks

If the layoutType is set as voltmx.flex.FLOW_VERTICAL, the top property is measured from the bottom edge of the top sibling widget. The vertical space between two widgets is measured from bottom of the top sibling widget and top of the bottom sibling widget.

Example

//Sample code to set the top property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.top = "50dp";

frmHome.widgetID.top = "10%";

frmHome.widgetID.top = "10px";

Platform Availability

• Available in the IDE
• iOS, Android, Windows, SPA, and Desktop Web

Contains an animation transformation that can be used to animate the widget.

Syntax

transform

Type

JSObject

Read/Write

Read + Write

Remarks

This property is set to the identify transform by default. Any transformations applied to the widget occur relative to the widget’s anchor point. The transformation contained in this property must be created using the voltmx.ui.makeAffineTransform function.

Example

This example uses the button widget, but the principle remains the same for all widgets that have a transform property.

//Animation sample
var newTransform = voltmx.ui.makeAffineTransform();
newTransform.translate3D(223, 12, 56);

//translates by 223 xAxis,12 in yAxis,56 in zAxis
widget.transform = newTransform;

Platform Availability

• iOS, Android, Windows, and SPA

This property is used to enable and configure left or right swipe actions for a widget. The widgetSwipeMove Property can be used for all widgets . The most common use case is for implementing swipe action for individual rows in Segment.

Syntax

widgetSwipeMove

Type

String

Read/Write

Read + Write

Input Parameters

The following table consists of the parameters of the callback parameter:

Remarks

• For a Segment, the widgetSwipeMove Property is configured while setting the data of the Segment.

Note: It is not recommended to assign the widgetSwipeMove property on a top Flex container of the segment template widget.

Limitations

• When a translation animation is applied to the same widget that has widgetSwipeMove already configured, the action which has been performed last takes precedence. For example, if you have set a translation animation on a FlexContainer and then set the widgetSwipeMove property, the actions set in widgetSwipeMove take precedence over the translation animation.
• The state of the swipe transition of the widget is not retained.

• In a Segment, the widgetSwipeMove Property must be configured for the rows so that they reset to the previous position.

• If the widgetSwipeMove property is configured on a top level Flex container of a segment template, the onRowClick event will not be triggered. - Applicable on iOS, Android, and SPA.
• Android limitation: On Android devices, when the user lifts their finger, the transition occurs immediately.

Example

Following is a code snippet for a mail app. Here we have used a Segment for listing the mail and the widgetSwipeMove Property has been configured for the SwipeFlex FlexContainer.

//This is a generic property that is applicable for various widgets.  
//Here, we have shown how to use the widetSwipeMove property for Button widget.
/*You need to make a corresponding use of the 
widgetSwipeMove property for other applicable widgets.*/  
//### Example of a swipe move configuration.  
var swipeMoveConfig = {
 "translate": true,
 "Xboundaries": ["-60%", "60%"],
 "swipeLeft": [{
  "translateRange": ["-60%", "0%"],
  "callback": null,
  "translatePos": "-60%",
  "translate": true
 }, {
  "translateRange": ["0%", "60%"],
  "callback": null,
  "translatePos": "0%",
  "translate": true
 }],
 "swipeRight": [{
  "translateRange": ["-60%", "0%"],
  "callback": null,
  "translatePos": "0%",
  "translate": true
 }, {
  "translateRange": ["0%", "60%"],
  "callback": this.onCallback1,
  "translatePos": "60%",
  "translate": true
 }]
};  
  
this.view.myButton.widgetSwipeMove=swipeMoveConfig;  

Platform Availability

• Android, iOS, and SPA

This property determines the width of the widget and is measured along the x-axis.

The width property determines the width of the widget’s bounding box. The value may be set using DP (Device Independent Pixels), Percentage, or Pixels. For supported widgets, the width may be derived from either the widget or container’s contents by setting the width to “preferred”.

Syntax

width

Type

Number, String, and Constant

Read/Write

Read + Write

Remarks

Following are the options that can be used as units of width:

• %: Specifies the values in percentage relative to the parent dimensions.
• px: Specifies the values in terms of device hardware pixels.
• dp: Specifies the values in terms of device independent pixels.
• default: Specifies the default value of the widget.
• voltmx.flex.USE_PREFERED_SIZE: When this option is specified, the layout uses preferred width of the widget as width and preferred size of the widget is determined by the widget and may varies between platforms.

Example

//Sample code to set the width property for widgets by using DP, Percentage and Pixels.
frmHome.widgetID.width = "50dp";

frmHome.widgetID.width = "10%";

frmHome.widgetID.width = "10px";

Platform Availability

• Available in the IDE
• iOS, Android, Windows, SPA, and Desktop Web

This property specifies the stack order of a widget. A widget with a higher zIndex is always in front of a widget with a lower zIndex.

The zIndex property is used to set the stack, or layer order of a widget. Widgets with higher values will appear “over”, or “on top of” widgets with lower values. Widgets layered over other widgets will override any interaction events tied to widgets beneath. Modifying the zIndex does not modify the order of the widgets in the Volt MX Iris hierarchy, inside of a flexContainer or form. The zIndex property accepts only positive values.

Syntax

zIndex

Type

Number

Read/Write

Read + Write

Remarks

The default value for this property is 1.

Note: Modifying the zIndex does not modify the order of the widgets inside the FlexContainer. If zIndex is same for group of overlapping widgets then widget order decides the order of overlapping. The last added widget is displayed on top.

From Volt MX Iris V9 SP2 FP7, developers can configure the Z Index value for a Responsive Web app as Auto or Custom. When the selected Z Index value is Auto, the default Z Index value of 1 is applied. When the selected Z Index value is Custom, developers can specify a desired numeric value.

Prior to the V9 SP2 FP7 release, the default value for the Z Index was 1. When developers imported any third-party libraries with the Z index set as Auto, content overflow was disabled as the value of Auto is less than 1.

Note: The Z Index value Auto is supported only when the Enable JS Library mode is configured as unchecked.

For existing components, the value of the Z Index is configured as 1 for the Native channel. For the Responsive Web channel, the Z Index will be set as Custom with 1 as the value.

For new components, the value of the Z Index is configured as 1 for the Native channel. For the Responsive Web channel, the Z Index will be set as Auto or 1 based on the project level settings.

Note: If ModalContainer property is set to true in any of the FlexContainer widget, the Z Index value of that container and all of its parent containers should be set to Custom.

voltmx.flex.ZINDEX_AUTO : Constant to configure the Z Index value as auto programmatically.

//Sample code to set the ZIndex value to Auto  
 var flx = new voltmx.ui.FlexContainer({ 
  "id": "flx"
  "zIndex": voltmx.flex.ZINDEX_AUTO
});

//Sample code to set the ZIndex value to Auto
flx.zIndex = voltmx.flex.ZINDEX\_AUTO;

Example

//Sample code to set the zIndex property for widgets.  
frmHome.widgetID.zIndex = 300;

Platform Availability

• Available in the IDE
• iOS, Android, Windows, SPA, and Desktop Web